680ES-PG10
Built to provide a combination of performance and portability for cutting in-ground utility pipe, the 680ES-PG gas powered utility chain saw with PowerGrit ® chain will change the way you cut pipe. This affordably priced gas powered saw, allows you to cut up to 10” deep from one side into ductile iron, cast iron, PVC, HDPE, Insituform lining and even Asbestos*concrete pipe, and is also designed to run the full line of MAX series chains. With a quick switch of guidebar, chain and drive sprocket, you have the ability to use this saw in masonry, stone, and even reinforced concrete. Making it the most cost effective, versatile tool in your arsenal.
Uses:
|
Engine Type
|
2-stroke, Air Cooled
|
|
Displacement
|
76.5 cc (4.7 cu-in)
|
|
Horsepower
|
3.7 kW (5 hp) @ 9,500 rpm
|
|
Torque
|
4.1 Nm (36.3 in-lbs) @ 6,500 rpm
|
|
Engine Speed
|
11500 +/- 500 rpm (max) / 2,800 - 3,200 rpm (Idle)
|
|
Chain Speed at Maximum Power
|
34.5 m/s (6800 ft /min)
|
|
Weight
|
9.5 kg (21 lbs) powerhead only
|
|
Dimensions
|
46 cm (18 in) length / 29 cm (11.5 in) height / 25 cm (10 in) width
|
|
Starter
|
Dust and water resistant
|
|
Ignition
|
Special water resistant electronic ignition
|
|
Fuel ratio
|
4% (25:1) gasoline-to-oil
|
|
Fuel Capacity
|
0.88 liter (0.23 gallon)
|
|
Water Supply Requirement
|
Minimum: 1.5 bar (20 psi)
|
|
Water Flow Requirement
|
Minimum: 4 lpm (1 gpm)
|
|
Guaranteed Sound Power Level, Lwa (1)
|
117 dB(A) (Kwa=3.0 dB(A))
|
|
Equivalent Sound Pressure at the Operator's Ear Lwa
|
101.0 dB(A) (K = 2.0 dB(A))
|
|
Vibration, ahv eq Concrete Cutting (2)
|
7.2 m/s2 (K=1.0 m/s2) Front Handle/8.5 m/s2 (K=1.0 m/s2) Rear Handle
|
* Asbestos is a hazardous material, known to cause serious respiratory diseases. Cutting into asbestos can release asbestos fibers into the air. Always research and follow the correct safety procedures, including applicable national and state or provisional occupational health and safety regulations, and protect yourself and those around you from asbestos-related disease. Always arrange for the material to be removed safely by a qualified person. ICS is not responsible for exposure to asbestos caused by use of this product.