Klein D220-7-INS 7 in. Insulated, Heavy-Duty, Diagonal-Cutting Pliers, Tapered Nose
- Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
- Two layers of insulation provide protection against electric shock.
- Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
- A flame retardant, impact-resistant, bright orange outer coating.
- Heavy-duty tapered nose design.
- One-inch deep jaws easily reach into confined spaces.
- Integral guards help prevent hand contact with conductive parts.
- Jaw Length : 1" (25.4 mm)
- Jaw Thickness : 1/2" (12.7 mm)
- Jaw Width : 31/32" (24.60 mm)
- Cutting Knives : Standard
- Handle Color : Orange
- Overall Length : 7-7/8" (200.02 mm)
- Nose Type : Tapered
- Special Features : Flame Retardant and Impact Resistant Handle
- Standard : IEC 60900 and ASTM F1505
- Construction : Heavy-Duty
- Type : High-Leverage
- Application : ACSR, Screws, Nails and Most Hardened Wire
- Material : Induction Hardened Steel
- Handle Material : High-Dielectric Plastic
- Handle Type : Dual Insulated
- Insulated : Yes
- Protection : 1000V
- Finish : Combination Polished Black-Oxide
- Head Type : Fixed
- Cut Style : Diagonal-Cutting
- Handle Length : 6" (152 mm)
- Joint Type : Hot-Riveted
- Weight : 0.7 lbs. (0.31 kg)
- Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
- Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
- Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
- Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
- UPC92644720314
- MPND220-7-INS