Klein 1692-5AT Chicago Grip Bell-System Type Grip
Designed for use on aluminum, copper, weatherproof coated wire, PVC covered conductors and messenger and guy strand. The Chicago style grip was designed for cable sizes from .12in. – 1.0in. . Equipped with chain, toggle and shackle. For support wire .134 and larger, refer to 1659 series. Outside diameter of support wire includes thickness of polyethylene coating.
- Type: L Strand Puller
- Sub Brand: Chicago Grip
- Jaw Length: 5in.
- Maximum Safe Load: 8000 lb
- Weight: 0.10 lb
- Cable Diameter: 0.218in. to 0.550in.
- Locking Handle: Y
- Hot Latch: —
- Spring: Y
Before each use, clean jaw area and inspect grip for proper operation to avoid slippage. When used on/near energized lines, ground, insulate, or isolate grip before pulling. Do not exceed rated capacity. Do not exceed rated capacity. Grips are to be used for temporary installation, not for permanent anchorage.
- F1Equipped with chain, toggle and shackle to keep grip from falling off the cable.
- F2For support wire .134 and larger, refer to 1659 series. Outside diameter of support wire includes thickness of polyethylene coating.
- UPC092644471858
- MPN1692-5AT