Klein 1692-5 Grip for High Strength Cables 0.218in.
Designed for use on aluminum, copper, weatherproof coated wire, PVC covered conductors and messenger and guy strand. The Chicago style grip was designed for cable sizes from .12in. – 1.0in. . When pulling EHS galvanized-steel cable, the galvanizing has a tendency to coat the jaws of any grip, causing the cable to slip. Double in.Vin. contour reduces the possibility of slippage and damage to the cable.
- Cable Diameter: 0.218in. to 0.550in.
- Maximum Safe Load: 8000 lb
- Sub Brand: Chicago Grip
- Weight: 5.4 lb
- Application: Extra-High-Strength Cables, Messenger, Guy Strand
- Jaw Length: 5in.
- Locking Handle: Y
- Hot Latch: —
- Spring: Y
Before each use, clean jaw area and inspect grip for proper operation to avoid slippage. When used on/near energized lines, ground, insulate, or isolate grip before pulling. Do not exceed rated capacity. Do not exceed rated capacity. Grips are to be used for temporary installation, not for permanent anchorage.
- F1Designed for cable sizes from .218in. to 0.550in. .
- F2Double in.Vin. grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable.
- F3For larger conductors, see our grips with round inside-jaw contour.
- UPC092644471834
- MPN1692-5