Klein 1684-74 Chicago Curved Jaw Grip for EHS Cable
Designed for use on aluminum, copper, weatherproof coated wire, PVC covered conductors and messenger and guy strand. The Chicago style grip was designed for cable sizes from .12in. – 1.0in. . When pulling EHS galvanized-steel cable, the galvanizing has a tendency to coat the jaws of any grip, causing the cable to slip. Double in.Vin. contour reduces the possibility of slippage and damage to the cable.
- Jaw Length: 5in.
- Sub Brand: Chicago Grip
- Maximum Safe Load: 8000 lb EHS Specific
- Weight: 5.6 lb
- Cable Diameter: 0.218in. to 0.550in.
- Locking Handle: Y
- Hot Latch: —
- Spring: Y
Before each use, clean jaw area and inspect grip for proper operation to avoid slippage. When used on/near energized lines, ground, insulate, or isolate grip before pulling. Do not exceed rated capacity. Do not exceed rated capacity. Grips are to be used for temporary installation, not for permanent anchorage.
- F1When pulling EHS galvanized-steel cable, the galvanizing has a tendency to coat the jaws of any grip, causing the cable to slip.
- F2To reduce the possibility of slippage and damage to the cable, the jaws of this grip are milled on a curve with a double in.Vin. contour.
- UPC092644471728
- MPN1684-74