Klein 1684-5H Chicago Grip with Latch 0.37in. Cable
Designed for use on aluminum, copper, weatherproof coated wire, PVC covered conductors and messenger and guy strand. The Chicago style grip was designed for cable sizes from .12in. – 1.0in. . Hot-line grips for both bare and insulated conductors. Grip may be placed on wire with hot-line stick. When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire. Standard hot-line grips are not supplied with springs or lock-open features.
- Jaw Length: 5in.
- Maximum Safe Load: 8000 lb
- Sub Brand: Chicago Grip
- Weight: 6.5 lb
- Cable Diameter: 0.217in. to 0.550in.
- Special Features: May Be Placed on Wire with Hot-Line Stick
- Material: Steel
- Application: Steel Stranded Cable
- Locking Handle: Y
- Hot Latch: Y
- Spring: —
Before each use, clean jaw area and inspect grip for proper operation to avoid slippage. When used on/near energized lines, ground, insulate, or isolate grip before pulling. Do not exceed rated capacity. Do not exceed rated capacity. Grips are to be used for temporary installation, not for permanent anchorage.
- F1Hot-line grips for steel stranded cable.
- F2Grip may be placed on wire with hot-line stick.
- F3When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire.
- F4Standard hot-line grips are not supplied with springs or lock-open features.
- F5When springs or lock-open features are desired, add prefix letter in.Sin. before catalog number .
- UPC092644471674
- MPN1684-5H