Klein 1656-60H Chicago Grip with Latch 0.96in. Capacity
Klein Tools 1656 Series Chicago Grips have a round, smooth inside jaw contour making it perfect for work with stranded copper cables. These smooth jaws grip with maximum contact and are less likely to cause cable deformation. This grip also has a hot-line latch designed for placing a grip on a cable with a hot-line stick. The three notches in the hot-line latch adjust the balance of the grip to better match the direction of the cable sag. Grips are rigorously tested and pulled to rated load to ensure the highest quality and reliability.
- Cable Diameter: 0.86in. o 0.96in.
- Application: Bare Conductors
- Jaw Length: 5-1/2in.
- Sub Brand: Chicago Grip
- Weight: 8.4 lb
- Locking Handle: —
- Hot Latch: Y
- Spring: —
Before each use, clean jaw area and inspect grip for proper operation to avoid slippage. When used on/near energized lines, ground, insulate, or isolate grip before pulling. Do not exceed rated capacity. Do not exceed rated capacity. Grips are to be used for temporary installation, not for permanent anchorage.
- F1Hot-line grips for both bare and insulated conductors.
- F2Grip may be placed on wire with hot-line stick.
- F3When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire.
- F4Standard hot-line grips are not supplied with springs or lock-open features.
- F5When springs or lock-open features are desired, add prefix letter in.Sin. before catalog number .
- UPC092644471186
- MPN1656-60H