Home :: Shop By Manufacturer :: Simpson Strong-Tie Anchoring Systems :: Chemical Anchors :: Crack Injection
Home :: Fasteners :: Chemical Anchors :: Injection Epoxy Systems :: ETI/ETIG - Injection Epoxy

ETIPAC10KT Simpson Strong-Tie - Crack-Pac 9oz Injection Epoxy System Kit

SKU: ETIPAC10KT
List Price $139.65
Your Price $114.65
You Save $25.00
Qty
 

Volume Discounts

QtyPrice
5$96.65
10$90.65
The Crack-Pac? is a two-part, low viscosity Epoxy-Tie crack injection formula that is dispensed using a standard caulking tool. The mixed adhesive has the viscosity of a light oil and a low surface tension which allows it to penetrate fine to medium width cracks. Resin is contained in the cartridge and hardener is contained in the nozzle. Once the nozzle is threaded onto the cartridge, the hardener is released into the resin-filled cartridge by turning the knob at the base of the nozzle. The two components are mixed by shaking the cartridge.
  • ApplicationCrack-Pac is suitable for repair of cracks ranging from 1/64 " to 1/4 " wide in concrete walls, floors, slabs, columns and beams. It can be used to inject cracks in damp or wet conditions with excellent results. See detailed crack injection instructions. USAGE TEMPERATURE:In order for components to mix properly, the resin and hardener must be conditioned to 60°-80° F before mixing.
  • Shelf Life24 months from date of manufacture, unopened.
  • Storage ConditionsFor best results, store between 45° F - 95° F.
  • Clean UpWipe up with cotton cloths. If desired scrub area with abrasive, waterbased cleaner and flush with water. If approved, solvents such as ketones (MEK, acetone, etc.), laquer thinner, or adhesive remover can be used. DO NOT USE SOLVENTS TO CLEAN ADHESIVE FROM SKIN. Take appropriate precautions when handling flammable solvents. Solvents may damage surfaces to which they are applied. Cured Material: Chip or grind off surface.
  • Chemical Anchor Shipping NotesChemical Anchors can only be shipped using a ground shipping method. Because of the chemicals involved in the chemical anchors these products cannont be shipped via any air method. To expidite shipping we will sometimes have the order shipped from one of the manufacturers warehouses around the country when ever possible.

Customer Reviews


Write A Review

Additional Product Accessories

ETIGV22 Simpson Strong-Tie - ETIGV 22oz Gel Viscosity Injection Epoxy ETIGV22
ETIGV22 Simpson Strong-Tie - ETIGV 22oz Gel Viscosity Injection Epoxy
ETI Injection Epoxies are specially designed formulations for the injection of cracks in concrete. ETI epoxies are two-component, 1:1 ratio, 100% epoxy solids formulations.
$33.00
ETILV22 Simpson Strong-Tie - ETILV 22oz Low Viscosity Injection Epoxy ETILV22
ETILV22 Simpson Strong-Tie - ETILV 22oz Low Viscosity Injection Epoxy
ETI Injection Epoxies are specially designed formulations for the injection of cracks in concrete. ETI epoxies are two-component, 1:1 ratio, 100% epoxy solids formulations.
$35.32
ETIPAC10 Simpson Strong-Tie - Crack-Pac 9oz Injection Epoxy System ETIPAC10
ETIPAC10 Simpson Strong-Tie - Crack-Pac 9oz Injection Epoxy System
The Crack-Pac? is a two-part, low viscosity Epoxy-Tie crack injection formula that is dispensed using a standard caulking tool.
$26.65


 
SSL