Home :: Shop By Manufacturer :: Simpson Strong-Tie Anchoring Systems :: Chemical Anchors :: Crack Injection
Home :: Fasteners :: Chemical Anchors :: Injection Epoxy Systems :: ETI/ETIG - Injection Epoxy

ETIGV22 Simpson Strong-Tie - ETIGV 22oz Gel Viscosity Injection Epoxy

SKU: ETIGV22
List Price $40.83
Your Price $33.00
You Save $7.83
Qty
 

Volume Discounts

QtyPrice
5$30.63
10$28.27
ETI Injection Epoxies are specially designed formulations for the injection of cracks in concrete. ETI epoxies are two-component, 1:1 ratio, 100% epoxy solids formulations. They are available in 22 ounce side-by-side cartridges and are dispensed through a static mixing nozzle using a manual or pneumatic dispensing tool. ETI is available in two viscosities: ETI-LV (low viscosity) and ETI-GV (gel viscosity) to handle a wide range of crack widths. Properly installed, they provide a repair that is both waterproof and high strength (structural).
  • UsesEpoxy-Tie injection epoxies are suitable for repairing non-moving cracks in concrete walls, floors, slabs, columns and beams. They can be used to inject cracks in damp or wet conditions with excellent results. Apply to concrete 40° F or above. For best results, warm material to 60° F or above prior to application.
  • Shelf Life2 years in unopened cartridge.
  • Storage ConditionsFor best results, store between 45°-90° F.
  • Clean UpRemoval of Cured Adhesive: Chip or grind off surface. Uncured Adhesive: Wipe up with cotton cloths. If desired, scrub area with abrasive, waterbased cleaner and flush with water. If approved, solvents such as ketones (MEK, acetone, etc.), laquer thinner, or adhesive remover can be used. DO NOT USE SOLVENTS TO CLEAN ADHESIVE FROM SKIN. Take appropriate precautions when handling flammable sovents. Solvents may damage surface to which they are applied.
  • Chemical ResistanceVery good to excellent against distilled water, inorganic acids and alkalis. Fair to good against organic acids and alkalis, and many organic solvents. Poor against ketones.
  • Chemical Anchor Shipping NotesChemical Anchors can only be shipped using a ground shipping method. Because of the chemicals involved in the chemical anchors these products cannont be shipped via any air method. To expidite shipping we will sometimes have the order shipped from one of the manufacturers warehouses around the country when ever possible.

Customer Reviews


Write A Review

Additional Product Accessories

ETILV22 Simpson Strong-Tie - ETILV 22oz Low Viscosity Injection Epoxy ETILV22
ETILV22 Simpson Strong-Tie - ETILV 22oz Low Viscosity Injection Epoxy
ETI Injection Epoxies are specially designed formulations for the injection of cracks in concrete. ETI epoxies are two-component, 1:1 ratio, 100% epoxy solids formulations.
$35.32
ETIPAC10 Simpson Strong-Tie - Crack-Pac 9oz Injection Epoxy System ETIPAC10
ETIPAC10 Simpson Strong-Tie - Crack-Pac 9oz Injection Epoxy System
The Crack-Pac? is a two-part, low viscosity Epoxy-Tie crack injection formula that is dispensed using a standard caulking tool.
$26.65
ETIPAC10KT Simpson Strong-Tie - Crack-Pac 9oz Injection Epoxy System Kit ETIPAC10KT
ETIPAC10KT Simpson Strong-Tie - Crack-Pac 9oz Injection Epoxy System Kit
The Crack-Pac? is a two-part, low viscosity Epoxy-Tie crack injection formula that is dispensed using a standard caulking tool.
$114.65


 
SSL