Home :: Fasteners :: Chemical Anchors :: Acrylic Tie Adhesive
Home :: Shop By Manufacturer :: Simpson Strong-Tie Anchoring Systems :: Chemical Anchors :: Epoxy, Acrylic & Vinylester Chemical Anchors

ATPAC05KT Simpson Strong-Tie - FastPac 5 ounce - Acrylic-Tie Construction Anchoring Adhesive

SKU: ATPAC05KT
List Price $16.99
Your Price $14.50
You Save $2.49
Qty
 

Volume Discounts

QtyPrice
5$11.75
10$10.00
Includes 5 ounce coaxial cartridge, adaptor and mixing nozzle. Dispenses with a standard caulking tool.Acrylic-Tie is a two component, 10:1 ratio acrylic based adhesive for use as a high strength, anchor grouting material. Formulated for use in all types of weather, AT is designed to dispense easily and cure at temperatures down to 0??F. Resin and initiator are dispensed and mixed simultaneously through the mixing nozzle. AT meets the physical requirements of ASTM C881, Type I & IV, Grade 3, Classes A, B & C, except Acrylic-Tie is a non-epoxy product formulated for fast cure time.
  • UsesThreaded rod anchoring - Rebar dowelling - Paste-over for crack injection - Pick proof sealant around doors, windows and fixtures
  • ApplicationSurfaces to receive adhesive must be clean and free of frost. The base material temperature must be 0° F or above at the time of installation. For information on installations below 0° F contact Simpson. Mixed material in nozzle can harden in 5–7 minutes. For installations in or through standing water, see Adhesive Anchors Application Guidelines for details.
  • Shelf LifeTwelve months from date of manufacture in unopened cartridge.
  • Storage ConditionsFor best results store between 32° F - 80° F. Partially used cartridges can be stored for a limited time by leaving nozzle in place. To re-use, attach new nozzle.
  • ColorResin – white; Initiator – black. When properly mixed, adhesive will be a uniform gray color.
  • Clean UpUncured material – Wipe up with cotton cloths. If desired scrub area with abrasive, waterbased cleaner and flush with water. If approved, solvents such as ketones (MEK, acetone, etc.), laquer thinner, or adhesive remover can be used. DO NOT USE SOLVENTS TO CLEAN ADHESIVE FROM SKIN. Take appropriate precautions when handling flammable solvents. Solvents may damage surfaces to which they are applied. Cured Material: Chip or grind off surface.
  • Chemical ResistanceVery good to excellent against distilled water and inorganic acids. Fair to good against organic acids and alkalis, inorganic alkalis, and many organic solvents. Poor against Ketones. For more detailed information contact Simpson or see Technical Bulletin T-SAS-CHEMRES04.
  • Technical Data

    See manufacturers product page for complete details - DETAILS

  • Suggested SpecificationsAnchoring Adhesive shall be a two-component acrylic based system supplied in manufacturer's standard side-by-side or coaxial cartridge and dispensed through a static-mixing nozzle supplied by the manufacturer. Adhesive shall meet the physical requirements of ASTM C-881 for Type I and IV, Grade 3, Class A, B and C and must develop a minimum 9,275 psi compressive yield strength after 7 day cure. Adhesive must have a heat deflection temperature of a minimum 149°F (65°C). Adhesive shall be Acrylic-Tie from Simpson Strong-Tie, Dublin, CA. Anchors shall be installed per Simpson Strong-Tie's instructions for Acrylic-Tie.
  • Chemical Anchor Shipping NotesChemical Anchors can only be shipped using a ground shipping method. Because of the chemicals involved in the chemical anchors these products cannont be shipped via any air method. To expidite shipping we will sometimes have the order shipped from one of the manufacturers warehouses around the country when ever possible.
  • Simpson Chemial Anchor Specification Sheets

    Complete Products Specification Sheets for all Simpson Strong-Tie Chemical Anchors.

    Files in the PDF file format require Adobe's free Acrobat Reader r (follow the link to download the program).

Customer Reviews


Write A Review

Additional Product Accessories

AMN813-RP5 Simpson Strong-Tie - Acrylic-Tie Mixing Nozzel AMN813-RP5
AMN813-RP5 Simpson Strong-Tie - Acrylic-Tie Mixing Nozzel
A package of five 12 element mixing nozzles with integrallymolded retaining nut for use with 5oz., 8oz. and 13oz. Acrylic-Tie only.
$6.94
AT13 Simpson Strong-Tie - AT 13 ounce - Acrylic-Tie Construction Anchoring Adhesive AT13
AT13 Simpson Strong-Tie - AT 13 ounce - Acrylic-Tie Construction Anchoring Adhesive
Acrylic-Tie is a two component, 10:1 ratio acrylic based adhesive for use as a high strength, anchor grouting material.
$23.70
AT30 Simpson Strong-Tie - AT 30 ounce - Acrylic-Tie Construction Anchoring Adhesive AT30
AT30 Simpson Strong-Tie - AT 30 ounce - Acrylic-Tie Construction Anchoring Adhesive
Acrylic-Tie is a two component, 10:1 ratio acrylic based adhesive for use as a high strength, anchor grouting material.
$34.99

Customers who purchased this item also purchased these items:

ETB4 Simpson Strong-Tie - Hole Cleaning Brushes (For 1/4in - 9/16in Holes) ETB4
ETB4 Simpson Strong-Tie - Hole Cleaning Brushes (For 1/4in - 9/16in Holes)


 
SSL