D'Versibits
Unique to Greenlee, these are exactly what you need to install wire through walls.
Allows placement of the drill bit at any point within the wall. Helpful in judging where the bit will be during drilling to avoid accidentally drilling through the wall. Useful for vertical and horizontal placements.
Sizes for 3/16in and 1/4in diameter shafts. Connect to chuck end of Dversibit shaft to increase the length of the bit.
Sizes for 3/16in and 1/4in diameter shafts. Connect to chuck end of Dversibit shaft to increase the length of the bit.
Sizes for 3/16in and 1/4in diameter shafts. Connect to chuck end of Dversibit shaft to increase the length of the bit.
Sizes for 3/16in and 1/4in diameter shafts. Connect to chuck end of Dversibit shaft to increase the length of the bit.
For drilling in tough woods and thick obstacles. Drilling speed relative to pressure applied. Chips can be brought easily out of the hole.
For drilling in tough woods and thick obstacles. Drilling speed relative to pressure applied. Chips can be brought easily out of the hole.
For drilling in tough woods and thick obstacles. Drilling speed relative to pressure applied. Chips can be brought easily out of the hole.
For drilling in masonry walls and through plaster. Recommended for use with Abrasion Shield to reduce friction and abrasion as the shaft turns against masonry.
For drilling in tough woods and thick obstacles. Drilling speed relative to pressure applied. Chips can be brought easily out of the hole.