Wire and Cable Pulling

Wire and Cable Pulling
Use with 640, 2001, 6001, 6500, or 6800 cable pullers to add foot control. Foot pressure required to operate.

An economical puller with enough power for most jobs. Lighter weight for easier mounting in tough applications. Leaf-type mounting chains wonn++t twist when tightening. Unique floor mounting attachment for quick reliable setup. Right-angle sheave allows t

5,000 lbs. (22.3 kN) pulling force, enough power to pull most 500 kcmil (MCM) (240 mm2) jobs of 500 feet (152 m) or less. Maximum Pull Force: 5,000 lbs. Pulling Speed: No Load - 14.5 fpm; 4,000 lbs. - 11.0 fpm; 5,000 lbs. - 9.5 fpm. Required Rope: 3/4in D

Feeds cable at variable speeds to match the speed of cable puller. Accommodates cable ranging in size up to 3.5in (88.9 mm) in diameter. Sets up easily and can be operated by just one person. Dual motors drive each wheel for traction on both sides of the

Pull up to 6,500 lbs. (28.9 kN) with less than 27 lbs. (120 N) of operator effort. Unique floor mounting attachment for quick, reliable setup. Leaf-type mounting chains won't twist when tightening. Heat-treated steel serrated gripper feet for secure mount

Maximum Pull Force: 5,000 lbs. Pulling Speed: No Load - 14.5 fpm; 4,000 lbs. - 11.0 fpm; 5,000 lbs. - 9.5 fpm. Required Rope: 3/4in Double Braided Polyester Composite rope with 20,000 lb. (88.8 kN) minimum breaking strength.

Pull up to 6,500 lbs. (28.9 kN) with less than 27 lbs. (120 N) of operator effort. Unique floor mounting attachment for quick, reliable setup. Leaf-type mounting chains won't twist when tightening. Heat-treated steel serrated gripper feet for secure moun
 
SSL